centos6超20TB磁盤的分區格式化的示例代碼
發布日期：2022-02-01 19:49 | 文章來源：gibhub
一、服務器環境配置：
1、檢查磁盤分區：
近期項目有個服務從虛擬機遷移到物理機，服務磁盤用戶自己做了raid為3.8TB 2塊磁盤配置 Raid1然后又3.8TB 6塊磁盤配置了Raid5，安裝操作系統使用的sda 3.8TB空間的raid1已分區。3.8TB*6的磁盤sdb共20TB的空間需要分區，并掛載給系統做存儲使用。步驟如下:
1.1查詢確認sdb狀態：
# fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 4000.2 GB, 4000225165312 bytes 255 heads, 63 sectors/track, 486333 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted Disk /dev/sdb: 20001.1 GB, 20001125826560 bytes 255 heads, 63 sectors/track, 2431665 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/mapper/VolGroup-LogVol00: 2531.7 GB, 2531690283008 bytes 255 heads, 63 sectors/track, 307793 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/mapper/VolGroup-LogVol01: 1468.0 GB, 1468006400000 bytes 255 heads, 63 sectors/track, 178474 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000
1.2、sdb磁盤分區：
# parted /dev/sdb GNU Parted 2.1 使用 /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print #查看當前分區 Model: LSI MRSASRoMB-8i (scsi) Disk /dev/sdb: 20.0TB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name 標志 (parted) mkpart primary 0% 100% #將磁盤所有空間分為一個區 (parted) print #再次查詢磁盤分區 Model: LSI MRSASRoMB-8i (scsi) Disk /dev/sdb: 20.0TB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name 標志 1 1049kB 20.0TB 20.0TB primary (parted) quit 信息: You may need to update /etc/fstab.
1.3、正確格式化的方法：
a、使用mkfs命令（如下）格式化是無法格式化的，檢查為mkfs.ext4無法格式化16TB以上的分區，原因為Centos6.10 e2fsprogs版本為1.41.12，需升級為1.42版本
mkfs.ext4 /dev/sdb1 #無法如此格式化
b、升級e2fsprogs版本：
tar zvxf e2fsprogs-1.42.10.tar.gz cd e2fsprogs-1.42.10 mkdir build cd build/ ../configure make make install ##如有“忽略”錯誤正常。
c、查詢需要分區的扇區大小
# df -h Disk /dev/sdb: 20001.1 GB, 20001125826560 bytes 255 heads, 63 sectors/track, 2431665 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary.
d、對磁盤重新格式化命令如下：
# mke2fs -O 64bit,has_journal,extents,huge_file,flex_bg,uninit_bg,dir_nlink,extra_isize -i 267350 /dev/sdb1 mke2fs 1.42.10 (18-May-2014) Warning: the fs_type huge is not defined in mke2fs.conf Creating filesystem with 4883086848 4k blocks and 76298240 inodes Filesystem UUID: 74dabc93-177b-4531-aab9-e55a1e2efe9d Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848, 512000000, 550731776, 644972544, 1934917632, 2560000000, 3855122432 Allocating group tables: 完成 正在寫入inode表: 完成 Creating journal (32768 blocks): 完成 Writing superblocks and filesystem accounting information: 完成 This filesystem will be automatically checked every 34 mounts or ##提示180天問題 180 days, whichever comes first. Use tune2fs -c or -i to override.
e、解決180天問題
# tune2fs -i 3650d /dev/sdb1 tune2fs 1.42.10 (18-May-2014) Setting interval between checks to 315360000 seconds #確認時間正確 # tune2fs -l /dev/sdb1 tune2fs 1.42.10 (18-May-2014) Filesystem volume name: <none> Last mounted on: <not available> Filesystem UUID: 74dabc93-177b-4531-aab9-e55a1e2efe9d Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr dir_index filetype extent 64bit flex_bg sparse_super huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 76298240 Block count: 4883086848 Reserved block count: 244154342 Free blocks: 4877929145 Free inodes: 76298229 First block: 0 Block size: 4096 Fragment size: 4096 Group descriptor size: 64 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 512 Inode blocks per group: 32 Flex block group size: 16 Filesystem created: Fri Jun 5 17:08:54 2020 Last mount time: Fri Jun 5 17:14:34 2020 Last write time: Fri Jun 5 17:15:58 2020 Mount count: 1 Maximum mount count: 34 Last checked: Fri Jun 5 17:08:54 2020 ##開始時間 Check interval: 315360000 (121 months, 2 weeks, 6 days) Next check after: Mon Jun 3 17:08:54 2030 ##最終時間 Lifetime writes: 349 MB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: 0f4e7ee0-4aec-41cf-b81a-7d5a4ed045c4 Journal backup: inode blocks
1.4、掛載磁盤：
a、掛載磁盤
# cd /
# mkdir data
# mount /dev/sdb1 /data
# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-LogVol00
ext4 2.3T 12G 2.2T 1% /
tmpfs tmpfs 32G 144K 32G 1% /dev/shm
/dev/sda1 ext4 477M 41M 412M 9% /boot
/dev/mapper/VolGroup-LogVol01
ext4 1.4T 70M 1.3T 1% /home
/dev/sdb1 ext4 19T 20K 18T 1% /data
b、設置開機掛載
在文件尾部增加一行如下內容，需注意實際的文件路徑。
vim /etc/fstab /dev/sdb1 /data ext4 defaults 0 0
到此這篇關于centos6超20TB磁盤的分區格式化的示例代碼的文章就介紹到這了,更多相關centos6磁盤分區格式化內容請搜索本站以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持本站！
版權聲明：本站文章來源標注為YINGSOO的內容版權均為本站所有，歡迎引用、轉載，請保持原文完整并注明來源及原文鏈接。禁止復制或仿造本網站，禁止在非maisonbaluchon.cn所屬的服務器上建立鏡像，否則將依法追究法律責任。本站部分內容來源于網友推薦、互聯網收集整理而來，僅供學習參考，不代表本站立場，如有內容涉嫌侵權，請聯系alex-e#qq.com處理。
相關文章
關注官方微信