色综合久久久无码中文字幕波多,色五月丁香六月欧美综合

效果圖

mqtt發布

本代碼中publish是一個死循環，數據一直往外發送。

import random
import time
from paho.mqtt import client as mqtt_client
import json
from datetime import datetime
broker = 'broker.emqx.io'
port = 1883
topic = "/python/mqtt/li"
client_id = f'python-mqtt-{random.randint(0, 1000)}'  # 隨機生成客戶端id

def connect_mqtt():
 def on_connect(client, userdata, flags, rc):
  if rc == 0:
print("Connected to MQTT Broker!")
  else:
print("Failed to connect, return code %d\n", rc)
 client = mqtt_client.Client(client_id)
 client.on_connect = on_connect
 client.connect(broker, port)
 return client

def publish(client):
 while True:
  time.sleep(0.01)
  msg = json.dumps({"MAC": "0123456789",  "samplerate": 12,  "sampletime": str(datetime.utcnow().strftime('%Y/%m/%d-%H:%M:%S.%f')[:-3]),  "battery": 0.5,  "acc": [
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],
  [random.randint(200, 350), -random.randint(200, 350), -random.randint(200, 350), random.randint(200, 350), random.randint(200, 350), random.randint(200, 350)],  ]})
  result = client.publish(topic, msg)
  status = result[0]
  if status == 0:
print(f"Send `{msg}` to topic `{topic}`")
  else:
print(f"Failed to send message to topic {topic}")

def run():
 client = connect_mqtt()
 client.loop_start()
 publish(client)

if __name__ == '__main__':
 run()

mqtt訂閱

from paho.mqtt import client as mqtt_client
import time
import os
broker = 'broker.emqx.io'
port = 1883
topic = "/python/mqtt/li"
def connect_mqtt(client_id):
 """ MQTT 連接函數。 """
 def on_connect(client, userdata, flags, rc):
  """
  連接回調函數
  在客戶端連接后被調用，在該函數中可以依據 rc 來判斷客戶端是否連接成功。
  """
  if rc == 0:
print("Connected to MQTT Broker! return code %d" % rc)
  else:
print("Failed to connect, return code %d\n", rc)
 client = mqtt_client.Client(client_id)
 # client.username_pw_set('uname', 'upwd')  # 鏈接mqtt所需的用戶名和密碼，沒有可不寫
 client.on_connect = on_connect
 client.connect(broker , port)
 return client

def subscribe(client: mqtt_client, a_topic):
 """  訂閱消息 """
 def on_message(client, userdata, msg):
  """
  消息回調函數
  在客戶端從 MQTT Broker 收到消息后被調用，在該函數中我們將打印出訂閱的 topic 名稱以及接收到的消息內容。
* 這里可添加自定義數據處理程序
  """
  print('From topic : %s\n\tmsg : %s' % (msg.topic, msg.payload.decode()))
 client.subscribe(topic)
 client.on_message = on_message

def run(client_id, topic):
 client = connect_mqtt(client_id)
 subscribe(client, topic)
 client.loop_forever()
if __name__ == '__main__':
 run('test_eartag-003-python-li', 'zk100/gw/#')

matplotlib繪制動態圖

import matplotlib.pyplot as plt
import numpy as np
count = 100  # 圖中最多數據量
ax = list(range(count))  # 保存圖1數據
ay = [0] * 100
bx = list(range(count))  # 保存圖2數據
by = [0] * 100
num = count  # 計數
plt.ion()  # 開啟一個畫圖的窗口進入交互模式，用于實時更新數據
plt.rcParams['figure.figsize'] = (10, 10)  # 圖像顯示大小
plt.rcParams['font.sans-serif'] = ['SimHei']  # 防止中文標簽亂碼，還有通過導入字體文件的方法
plt.rcParams['axes.unicode_minus'] = False
plt.rcParams['lines.linewidth'] = 0.5  # 設置曲線線條寬度
plt.tight_layout()
while True:
 plt.clf()  # 清除刷新前的圖表，防止數據量過大消耗內存
 plt.suptitle("總標題", fontsize=30)  # 添加總標題，并設置文字大小
 g1 = np.random.random()  # 生成隨機數畫圖
 # 圖表1
 ax.append(num)  # 追加x坐標值
 ay.append(g1)  # 追加y坐標值
 agraphic = plt.subplot(2, 1, 1)
 agraphic.set_title('子圖表標題1')  # 添加子標題
 agraphic.set_xlabel('x軸', fontsize=10)  # 添加軸標簽
 agraphic.set_ylabel('y軸', fontsize=20)
 plt.plot(ax[-count:], ay[-count:], 'g-')  # 等于agraghic.plot(ax,ay,'g-')
 # 圖表2
 bx.append(num)
 by.append(g1)
 bgraghic = plt.subplot(2, 1, 2)
 bgraghic.set_title('子圖表標題2')
 bgraghic.plot(bx[-count:], by[-count:], 'r^')
 plt.pause(0.001)  # 設置暫停時間，太快圖表無法正常顯示
 num = num + 1

matplotlib繪制mqtt數據實時圖像

單線程

先啟動mqtt訂閱服務
mqtt訂閱中有阻塞，更新數據后因訂閱服務沒有結束，導致繪圖程序無法繪圖
先啟動繪圖程序
繪圖程序本身也是個循環，拿不到mqtt的實時數據，圖像無法更新

兩個服務加入?yún)f(xié)程，也不行。具體原因還不知道，容后補充。
mqtt作為線程啟動，可解決上述問題

import json
import random
from paho.mqtt import client as mqtt_client
import time
import datetime
from math import ceil, floor
import matplotlib.pyplot as plt
import _thread
# 公共變量
broker = 'broker.emqx.io'
topic = "/python/mqtt/li"
port = 1883
client_id = f'python-mqtt-li-{random.randint(0, 100)}'
show_num = 300
x_num = [-1]  # 計數
acc1 = []
acc2 = []
acc3 = []
acc4 = []
acc5 = []
acc6 = []
stime = []

"""mqtt subscribe topic"""
def str_microsecond_datetime2int_13timestamp(str_microsecond_datetime):
 """將字符串型【毫秒級】格式化時間 轉為 【13位】整型時間戳"""
 datetime_obj = datetime.datetime.strptime(str_microsecond_datetime, "%Y/%m/%d-%H:%M:%S.%f")
 obj_stamp = int(time.mktime(datetime_obj.timetuple()) * 1000.0 + datetime_obj.microsecond / 1000.0) / 1000.0
 return obj_stamp

def int2datetime(int_float_timestamp):
 """
 有小數點：分離小數點，整數轉為格式化時間，小數點直接跟在后面
 無小數點：從第10位進行分離，
 所以本函數只適用于時間戳整數位數大于9且小于11.
 """
 if '.' in str(int_float_timestamp):
  int_float = str(int_float_timestamp).split('.')
  date = time.localtime(int(int_float[0]))
  tempDate = time.strftime("%Y/%m/%d-%H:%M:%S", date)
  secondafter = '.' + str(int_float[1])
  return str(tempDate) + secondafter

def parse_mqttmsg(msg):
 """解析mqt頭數據MAC samplerate sampletime battery acc"""
 content = json.loads(msg.payload.decode())
 span = 1000 / content['samplerate'] * 10
 time_span = [ceil(span) / 10 / 1000, floor(span) / 10 / 1000]
 sampletime = content['sampletime']
 sampletime_int = str_microsecond_datetime2int_13timestamp(sampletime)
 acc = content['acc']
 for i in range(len(acc)):
  x_num.append(x_num[-1] + 1)
  acc1.append(acc[i][0])
  acc2.append(acc[i][1])
  acc3.append(acc[i][2])
  acc4.append(acc[i][3])
  acc5.append(acc[i][4])
  acc6.append(acc[i][5])
  if i != 0:
sampletime_int += time_span[i % 2]
stime.append(int2datetime(round(sampletime_int * 1000, 0) / 1000))
  else:
stime.append(sampletime)
  print(x_num[-1], stime[-1], acc1[-1], acc2[-1], acc3[-1], acc4[-1], acc5[-1], acc6[-1])

def connect_mqtt():
 def on_connect(client, userdata, flags, rc):
  if rc == 0:
print("Connected to MQTT Broker!")
  else:
print("Failed to connect, return code %d\n", rc)
pass
 client = mqtt_client.Client(client_id)
 client.on_connect = on_connect
 client.connect(broker, port)
 return client

def subscribe(client: mqtt_client):
 def on_message(client, userdata, msg):
  # print(f"Received `{msg.payload.decode()}` from `{msg.topic}` topic")
  parse_mqttmsg(msg)
 client.subscribe(topic)
 client.on_message = on_message

def run():
 client = connect_mqtt()
 subscribe(client)
 client.loop_forever()

""" draw figures """
def draw_figure():
 plt.ion()  # 開啟一個畫圖的窗口進入交互模式，用于實時更新數據
 plt.rcParams['figure.figsize'] = (10, 10)  # 圖像顯示大小
 plt.rcParams['font.sans-serif'] = ['SimHei']  # 防止中文標簽亂碼，還有通過導入字體文件的方法
 plt.rcParams['axes.unicode_minus'] = False
 plt.rcParams['lines.linewidth'] = 0.5  # 設置曲線線條寬度

 count = 0
 while True:
  plt.clf()  # 清除刷新前的圖表，防止數據量過大消耗內存
  plt.suptitle("總標題", fontsize=30)  # 添加總標題，并設置文字大小
  plt.tight_layout()
  # 圖表1
  agraphic = plt.subplot(2, 1, 1)
  agraphic.set_title('子圖表標題1')  # 添加子標題
  agraphic.set_xlabel('x軸', fontsize=10)  # 添加軸標簽
  agraphic.set_ylabel('y軸', fontsize=20)
  plt.plot(x_num[1:][-show_num:], acc1[-show_num:], 'g-')
  try:
xtricks = list(range(len(acc1) - show_num, len(acc1), 10))  # **1**
xlabels = [stime[i] for i in xtricks]  # **2**
plt.xticks(xtricks, xlabels, rotation=15)
  except:
pass
  # 圖表2
  bgraghic = plt.subplot(2, 1, 2)
  bgraghic.set_title('子圖表標題2')
  bgraghic.set_xlabel('x軸', fontsize=10)  # 添加軸標簽
  bgraghic.set_ylabel('y軸', fontsize=20)
  bgraghic.plot(x_num[1:][-show_num:], acc2[-show_num:], 'r^')
  plt.pause(0.001)  # 設置暫停時間，太快圖表無法正常顯示
  count = count + 1

if __name__ == '__main__':
 # 多線程
 _thread.start_new_thread(run, ())
 draw_figure()

到此這篇關于Python中使用matplotlib繪制mqtt數據實時圖像的文章就介紹到這了,更多相關matplotlib繪制mqtt數據實時圖像內容請搜索本站以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持本站！

版權聲明：本站文章來源標注為YINGSOO的內容版權均為本站所有，歡迎引用、轉載，請保持原文完整并注明來源及原文鏈接。禁止復制或仿造本網站，禁止在非maisonbaluchon.cn所屬的服務器上建立鏡像，否則將依法追究法律責任。本站部分內容來源于網友推薦、互聯網收集整理而來，僅供學習參考，不代表本站立場，如有內容涉嫌侵權，請聯系alex-e#qq.com處理。

排名優化：網站排名優化方法有什么，如何做有效果

老域名：怎樣才算老域名，老域名建站有什么影響

內容優化：關鍵字排名要做哪些方面的優化，怎樣做

技巧：網站轉化率究竟是什么，有什么提升的技巧

一下吧：外貿站優化有哪些基本的做法和注意事項

概要：競價推廣費用大概要多少呢，競價推廣好不好

一下吧：SEO中site是什么意思，作用和應用是怎樣的

郵箱：付費郵箱有哪些優勢，付費郵箱挑選要考慮什么

集群是什么意思：集群是什么意思，都有哪些優勢呢