python中字典和列表的相互嵌套問題詳解
首先明確:
1.訪問字典中的元素:dict_name[key] / dict_name.get(key)
2.訪問列表中的元素:list_name[索引]
1.列表中存儲字典:
1.列表中存儲多個字典
p={'name':'lin','age':21}
y={'name':'xue','age':20}
c=[p,y]
print(c)
輸出結果:
[{'name': 'Jonh', 'age': 18}, {'name': 'Marry', 'age': 19}]
2.訪問列表中字典的值
print(f"person's name is {people[0].get('name')}")
print(f"{people[1].get('name')}'s age is {people[1].get('age')}")
#先用person[0/1]訪問列表里的元素(字典),再用get方法訪問字典里的值
輸出結果:
person's name is Jonh
Marry's age is 19
3.遍歷訪問多個值
for person in people:
#將列表中的字典,依次賦值給person
print(f"{person['name']}'s age is {person['age']}")
#取出每個循環里變量person(字典)的鍵和值
輸出結果:
Jonh's age is 18
Marry's age is 19
因為字典中有多個鍵值對,所以進行多層嵌套。
外層嵌套訪問列表中的每個字典,內層嵌套訪問每個字典元素的鍵值對。
for person in people:
#在每個遍歷的字典里再進行嵌套(內層循環)
for k,v in person.items():
print(f"{k}:{v}")
輸出結果:
name:Jonh
age:18
name:Marry
age:19name:Jonh
age:18
name:Marry
age:19
2.字典中存儲列表
1.訪問字典中的列表元素
先用list[索引]訪問列表中的元素,用dict[key]方法訪問字典中的值。
favourite_places={
'lin':['beijing','tianjin'],
'jing':['chengdu','leshan'],
'huang':['shenzhen']
}
#訪問字典中的值可以用:dict_name[key]
print(favourite_places['lin'])
#訪問列表里面的元素用索引:list_name[索引]
print(favourite_places['lin'][0].title())
輸出結果:
['beijing', 'tianjin']
Beijing
循環訪問字典中列表的元素,也是要用dict_name[key]先訪問字典中的值(列表)
for i in favourite_places['lin']: print(i.title())
輸出結果:
Beijing
Tianjin
2.訪問字典中的值(字典中的值為列表)
注意:直接訪問字典中的值,會以列表的形式呈現。
for name,place in favourite_places.items():
print(f"{name.title()}'s favourite places are {place}")
輸出結果:
Lin's favourite places are ['beijing', 'tianjin']
Jing's favourite places are ['chengdu', 'leshan']
Huang's favourite places are ['shenzhen']
為了避免,要進行循環嵌套
for names,places in favourite_places.items(): #對三個鍵值對先進行一個大循環
print(f'{names.title()} favourite places are:') #在大循環里每一組鍵值對開頭先打印這句話
for place in places:#之后再對值進行一個小循環,打印出值中的每個元素
print(place.title())
輸出結果:
Lin favourite places are:
Beijing
Tianjin
Jing favourite places are:
Chengdu
Leshan
Huang favourite places are:
Shenzhen
3.字典中存儲字典
1.字典中不能全部由字典元素組成,會報錯。
p={'name':'lin','age':21}
y={'name':'xue','age':20}
c={p,y}
print(c)
TypeError Traceback (most recent call last)
<ipython-input-46-4127ab9ea962> in <module>
1 p={'name':'lin','age':21}
2 y={'name':'xue','age':20}
----> 3 c={p,y}
4 print(c)TypeError: unhashable type: 'dict'
2.字典中的值可由字典組成
users={
'a':{'name':'lin','age':21},
'b':{'name':'xue','age':20}
}
print('-----------直接訪問輸出-------------------')
print(users['a']['name'],users['a']['age'])
print(users['b']['name'],users['b']['age'])
print('\n-----------循環嵌套的方法輸出-------------------')
for username,userinfo in users.items():
print('\n'+username+':')
for name,age in userinfo.items():
print(name,age)
輸出結果:
-----------直接訪問輸出-------------------
lin 21
xue 20-----------循環嵌套的方法輸出-------------------
a:
name lin
age 21b:
name xue
age 20
4.容易出的小錯誤:
1.訪問順序: 可以用dict_name[key] / dict_name.get(key)訪問字典的值,也可以用列表索引list_name[索引]訪問列表的值。但是要注意哪個在外,哪個在內,先訪問外層,再訪問內層,直接訪問內層的會出錯。
2.字典的值為列表,訪問的結果是輸出整個列表 需要嵌套循環遍歷里面的鍵值對。
3.字典中不能全部由字典元素組成
總結
本篇文章就到這里了,希望能夠給你帶來幫助,也希望您能夠多多關注本站的更多內容!
版權聲明:本站文章來源標注為YINGSOO的內容版權均為本站所有,歡迎引用、轉載,請保持原文完整并注明來源及原文鏈接。禁止復制或仿造本網站,禁止在非maisonbaluchon.cn所屬的服務器上建立鏡像,否則將依法追究法律責任。本站部分內容來源于網友推薦、互聯網收集整理而來,僅供學習參考,不代表本站立場,如有內容涉嫌侵權,請聯系alex-e#qq.com處理。
關注官方微信